DYNA-STRIP "2000" SUPER CONCENTRATE
RESIN AND LATEX STRIPPER |
 |
| DESCRIPTION |
| DYNA-STRIP "2000" tank cleaner is designed for cleaning the toughest, most challenging washes while maintaining a safe working facility. DYNA-STRIP "2000" has hi-tech biodegradable surfactants for more cleaning power. DYNA-STRIP "2000" removes virtually all resins, latexes, regular solvents, oil and fuels. In most cases, it eliminates the need for pre-solve. DYNA-STRIP "2000" dissolves the heels, making waste more readily available for the micro-organisms, and lowering the bod to reduce the necessity for solid waste disposal. |
| |
| DIRECTIONS |
| For removing many tough soils in tank trucks. Begin with a mixture of 8% concentration of total gallons in vat and then wash at approximately 180 degrees fahrenheit. Reuse solution until effectiveness is reduced, then replace with a fresh batch. Required solution strength may vary with wash water temperature, water hardness, and soil load. Adjust the concentration until the desired economy and effectiveness are achieved. |
| |
DYNA-STRIP CONCENTRATE
POWDERED LATEX STRIPPER |
|
| DESCRIPTION |
| DYNA-STRIP CONCENTRATE powdered latex stripper is designed for cleaning the toughest, most challenging washes while maintaining a safe working facility. DYNA-STRIP powdered latex stripper contains no caustic soda, using hi-tech biodegradable surfactants for more cleaning power. It is completely safe to aluminum and other soft metals. DYNA-STRIP powdered latex stripper is a versatile product that removes virtually all latexes and can also be used on glycols, oils, plasticizers, and other petroleum based products. In most cases, it eliminates the need for presolve. For dried latex, ask about our DYNA-STRIP "2020" resin and latex skin cutter. |
| |
| DIRECTIONS |
| Safe for removing many tough soils in tank trailers. Begin with a mixture of 1 pound per 3.5 to 4 gallons of water and mix thoroughly. For best results on tough latexes add DYNA-STRIP "2020" resin and latex skin cutter at the rate of 10 gallons per 100 gallons of DYNA-STRIP powdered latex stripper solution. Reuse solution until effectiveness is reduced. Monitor ph of the mixture. When ph drops below 10, add 1 five gallon bucket of DYNA-STRIP powdered latex stripper and 1 five gallon bucket of DYNA-STRIP "2020" resin and latex skin cutter. Required solution strength may vary with wash water temperature, water hardness, and soil load. Adjust the concentration until the desired economy and effectiveness are achieved. Once solution becomes ineffective, replace with a fresh batch. |
| |
STRIP-EZE CONCENTRATE
HEAVY LATEX AND RESIN STRIPPER |
|
| DESCRIPTION |
| “STRIP-EZE” hot vat stripper is a concentrated highly alkaline stripper, which contains potassium hydroxide & silicates. High tech surfactants and active wetting agents provide excellent rinsing after washing. This product is nonflammable and water soluble. “STRIP-EZE” removes virtually all latex, resins, lube oils, fuel, and other regular solvents. It will not leave residue or film on surface to hinder tank cleaning, if rinsed properly with hot or cold water. It performs best when used in conjunction with hot vat operations at 170-f to 190-f degrees.
For
dried latex, ask about our DYNA-STRIP "2020" resin and
latex skin cutter. |
| |
| DIRECTIONS |
| For removing tough build-ups of latex & resins in tank trailers. Begin with a mixture of 8% concentration of total gallons in vat and then wash at approximately 190-f degrees.
For
best results on tough latexes add DYNA-STRIP "2020"
resin and latex skin cutter at the rate of 10 gallons
per 100 gallons of DYNA-STRIP powdered latex stripper
solution. Use solution until effectiveness is reduced, then add “STRIP-EZE” until effective “ph” of approximately “12-13” is reached. Required solution strength may vary with wash water temperature, water hardness, and soil load. Adjust the concentration until the desired economy and effectiveness are achieved. |
| |
DYNA-STRIP "2020" CONCENTRATE
RESIN AND LATEX SKIN CUTTER |
|
| DESCRIPTION |
| DYNA-STRIP "2020" is an additive for our DYNA-STRIP CONCENTRATE powdered latex stripper solution. When used with the DYNA-STRIP powdered latex stripper, it is an excellent remover of latex skins, greatly reducing or eliminating manual scraping. Improve costs and free your wash rack for more profitable operations with DYNA-STRIP "2020" and DYNA-STRIP powdered latex stripper solution. |
| |
| DIRECTIONS |
| Your DYNA-STRIP
"2020" Solution should be at 8% (by weight)
concentration. Add DYNA-STRIP "2020" at the rate of 10
gallons per 100 gallons. |
| |
