Our specialized Solvent Strippers offers fast-acting cutting power on the toughest resins, latex, and isocyanates. If you are spending excessive amounts of time scraping tanks with heavy buildup, or even turning away business, this product line will be a life saver. These chemicals should NOT be diluted or heated like our vat additive category. Solvent Strippers are formulated to be used at full concentrate and applied to soiled surfaces at low pressure. All these products need is contact time. For dedicated tanks with particularly heavy set-up, a Solvent Stripper can be used as "Presolve" to pre-treat the tank. For best results, Solvent Strippers can be re-circulated inside a tank using an ELIMINATOR KIT. These kits provide continuous chemical contact time and maximize reusability. Solvent Strippers are also commonly used for cleaning dome lids, hoses, valves, etc. that cannot be reached with a high pressure spinner.
Feel free to Contact Us you have any questions about a particular product, or would like to test our chemistry on your toughest tank.
DYNA-STRIP 500 SOLVENT STRIPPER
Dyna-Strip 500 an ideal for cleaning shop parts, hoses, and fittings. This blend of non-EPA regulated solvents will break down heavy hydrocarbon, resins, and isocyanates, while leaving a clean dry surface finish. Simply apply and wipe clean with a rag. No final soap wash or rinse required.
DYNA-STRIP 777 PRESOLVE
This tough acting blend of non EPA listed solvents will cut tough resins, tough coatings and soften and dissolve set up latex and resin. Our ELIMINATOR KIT with 777 is extremely effective.
DYNA-STRIP 1000 PREMIUM PRESOLVE
This powerful solvent blend will break down tough epoxies and flammable resins. Apply as a presolve to help break down and soften material set-up. For superior cleaning results, allow extended contact time using our ELIMINATOR KIT .
DYNA-STRIP 4000 LATEX PRESOLVE
This product was designed to dissolve set up latex with safety in mind. This blend works like the methylene chloride based products but has no EPA listed solvents and flashes over 200 F. Use the ELIMINATOR KIT with this product prevents hours of hard labor.
TRI CLEAN 1000B
Strong, fast acting naptha-based resin remover. Also great for breaking down rubber and plastic.